A new home's electrical system has to serve the family for decades. That means planning for today's needs and tomorrow's: enough circuits for a modern kitchen, capacity for an EV charger, wiring for home offices and smart home devices, and a panel with room to grow.
We work with homeowners, builders and general contractors to deliver new home electrical on schedule. Our work is planned from the drawings, installed to code and inspected at each stage, so the final inspection goes smoothly.

What’s included
Our new home electrical service covers the full build:
- Load planning and service sizing for the whole home
- Panel and service installation, including meter base and grounding
- Rough-in wiring for every room, including outlets, switches and lighting
- Dedicated circuits for kitchen appliances, HVAC, laundry and workshops
- Recessed, outdoor and decorative lighting installation
- Hardwired smoke and CO detectors, as code requires
- EV charger, generator and smart home pre-wiring
- Final trim-out, device installation, testing and inspection support
Signs you need new home electrical
You need a new home electrician if you are:
- Building a new home from the ground up
- Rebuilding after a fire, flood or other major damage
- Acting as your own general contractor and need a licensed electrician
- Planning a custom home with specific lighting or smart home requirements
- Building a detached guest house, barn or workshop with full power
- Looking for an electrician who can work to your builder's schedule
How it works
New home electrical follows the build in clear stages:
- 1. Plan from the drawings. We review the plans with you and your builder, confirm outlet and lighting locations, and size the service for the home.
- 2. Rough-in. Once framing is up, we run all the wiring, fit boxes and install the panel, ready for the rough-in inspection.
- 3. Trim-out. After drywall and painting, we install outlets, switches, fixtures and detectors, and connect the panel.
- 4. Final testing and inspection. Every circuit is tested, the system is labelled, and we support the final inspection so you can move in on time.
Safety first
New construction wiring is inspected at several stages, and for good reason. Wiring buried in walls is hard to fix later, so every connection must be right the first time. We use the correct cable and boxes for each location, protect wiring from nails and screws, and test every circuit before it is covered.
Temporary power during construction needs the same care as permanent wiring. We can set up safe temporary power for the build site so trades can work without overloading circuits or running extension cords through wet areas.
Pricing
Every new home is different, so we give upfront pricing before work begins. Call (844) 957-4676 for a quote. The price depends on the size of the home, the number of circuits and fixtures, the service size, the complexity of the lighting and smart home plans, and the build schedule. You will always know the cost before we start, and we accept Visa, Mastercard, American Express, Discover, PayPal and cash.
Frequently asked questions
When should the electrician start on a new build?
We get involved early, during planning, so the service size and outlet locations are right from the start. Rough-in wiring begins once framing is complete and the roof is on.
Do you work with my builder or general contractor?
Yes. We coordinate with your builder's schedule, attend site meetings as needed and work to the same inspection milestones as the rest of the build.
What is included in rough-in wiring?
Rough-in covers all the wiring inside the walls: cable runs, outlet and switch boxes, the panel and service, and the wiring for lighting, detectors and dedicated circuits. Trim-out, when devices and fixtures are fitted, comes after drywall.
Can you pre-wire for an EV charger or smart home?
Yes, and it is much cheaper to do during construction than afterwards. We can run the circuit for an EV charger, wire for smart switches and cameras, and add network cabling while the walls are open.
How long does new home electrical take?
It depends on the size of the home and the build schedule. Rough-in for a typical home takes one to two weeks, with trim-out taking a further week or so. We work to your builder's timeline.
Related services
Panel Upgrades
Replace an outdated or overloaded panel with 100A, 200A or larger service.
Wiring & Rewiring
New circuits, 240V wiring and whole-home rewiring to replace old or unsafe wiring.
Smart Home Electrical
Smart switches, lighting control and automation-ready electrical upgrades.
EV Charger Installation
Level 2 home EV charger installation with a dedicated 240V circuit.
Service areas
Local Emergency Electrician is headquartered in Los Angeles and serves homes and businesses across the United States, with services outside Los Angeles delivered through contractor agreements. Popular service areas include California, Los Angeles, CA, Texas, New York and Florida — see all service areas.
Need new home electrical? Talk to an electrician today.
Call (844) 957-4676, Monday to Saturday, 8:00 AM to 6:00 PM, or request a quote online and we will get back to you.